Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who enjoys the convenience of gas cooktops but requires an oven to bake in? Discover a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are the preferred choice of many home chefs with years of experience in the kitchen due to their superior temperature control. They also permit the use of advanced cooking techniques, such as charring. duel fuel cooker are expensive, especially if they require an extra gas connection and an electrician for installation.
What is a 13amp outlet?
If you have a dual fuel range cooker (also known as a gas and electric oven) you'll need a 13 amp plug. The plug must be wired by a certified electrician to the cooker ring.
This ensures that the flow of current through the plug does not exceed the safe limit that could result in an electrical fire. duel fuel cooker has a fuse that controls the current. The fuse goes out when the current flows through it beyond its capacity. This safeguards the appliance from overload of electricity.
The fuse is classified at 13 amps, as indicated on the top of the plug. this indicates the maximum current that the plug is able to pass without causing damage to the appliance or overheating the socket. When replacing fuses, it is important to use the same amperage rating as the original. If you replace the fuse with one that has an alternative rating, you run the risk of overheating the socket, and potentially putting yourself and others in serious risk.
A 13 amp fuse is likely to be a ceramic type, which is very durable and is able to withstand extreme temperatures generated by a range cooker. Ceramic is also fire-resistant, which makes it a better choice than other types of fuse.
There are a few different ways that 13 amp plugs can be fitted. The plug can be connected to a live socket by using either a screw or a jaw cord clamp. The clamp must be tightened after the plug is firmly pushed into place.
Some plugs have a diagram of wiring on cardboard over the pins. These should be removed before connecting the wires. It is vital that the wires are cut to the correct length as being too long can cause them to break when the plug cover is replaced. The earth wire must be the longest in order to connect it before the neutral and line pins.
How do I install the 13amp plug?
The vast majority of dual fuel range cookers in UK are wired with an amp rating of 13 amps. This is vital since ovens draw substantial current, while normal plug sockets have a 10-amp rating.
Generally speaking new appliances should be fitted with plugs at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not be connected to an outlet and that is where the issue arises.
When connecting the cooker to an existing plug socket the first thing to do is to ensure that the rating of the fuse in the box is in line with the plug's rating. This is important because an incorrectly-sized fuse can be dangerous.
It is also recommended to check that the fuse is installed within the cartridge and that there is no excessive movement within it. The next step is to prepare the flex that will be used. The first step is to remove the sheathing from the flex, exposing the three conductors that are insulated within. Then, nick the sheathing at the point of entry to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors. This nick must be large enough to allow the cable and sheathing to separate when the sheathing is pulled back. Cut off the excess sheathing, leaving around 40mm beyond the flex.
The flex is placed over the plug, with the earth terminal on the top and the live and neutral terminals at the bottom. Using the coloured conductors to guide you and the sheathing is removed from each pin, and the internal cable is fixed to the appropriate terminal by using the cord grip. If the plug is equipped with a clamp for cords that is screw-type, unwind it and then pull the insulation back to expose the copper wires. Finally, connect each of the conductors insulated to the appropriate terminal (starting with the earth first, then neutral and finally the live) using the channel they are running through the plug.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for 13amp plugs at 3kw at 230 volts is. This is a significant amount of power, but the standard fuse in the UK plugtop will not fail until the cable has heated to a dangerous level. A defective plug or socket can result in a fire, therefore it is important to be aware of how much power you use, especially in the kitchen.
The fuse inside the plugtops are made of ceramic, around 25mm in length and rated 240V mains. The fuses will bear a BS Kitemark or similar mark on the side and they will contain sand. Alternatives to glass or plastic are available, but they should not be used in conjunction with live plugs.
Most dual fuel range cookers in the UK require hard-wired and are not able to plug directly into an outlet on the wall. They are usually connected to a dedicated cooker ring circuit that is suitable for appliances that draw up to 20 amps.
Check the ring circuit of your home with the fuse box, or contact an electrician in your area. They should be able to tell you if the sockets in your home are connected to the same ring, or if they are separate and if there is a separate circuit for your oven.
The size of your kitchen will be one of the main factors when you decide to buy a dual fuel range cooker. We have a wide selection of cookers to suit any space, including compact 50 - 60cm dual fuel models as well as huge 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
If you're after something a little more unusual Don't worry, we also have a great range of gas and electric multi-functional cookers. These multifunction cookers can be used to cook a variety of meals, including curries, pasta, and casseroles!
Currys offers a broad selection of Cookers. Browse our online collection or visit us in our store to see the range. We provide free delivery and home installation on selected range cookers and we also offer flexible payment options. Our team is available to answer any questions you might have. Contact us by email or telephone. Credit is subject to the status of the account, and terms and conditions apply.
What is the maximum current draw of the cooker switch?
There is a lot of confusion about what the maximum current draw of a cooker's switch is. Most cookers are hard-wired, and connected to an oven-ring circuit not an ordinary socket. This is because they typically consume more than 20 amps when the electric hob and gas oven are used.
So, you won't find a dual fuel range cooker that could be connected to a standard socket because it could pose a serious fire risk and would be against electrical safety regulations. A professional electrician will always install any new electrical wiring to a cooker in the kitchen, and they will ensure that the total load (both the hob and oven) will not exceed the supply capability of the circuit.
Dual fuel range cookers mix the ability to cook with the sensitivity of a gas stove and the precision and accuracy of an electric oven. They are therefore a favorite among both home cooks and chefs. If you want to try different cooking techniques, such as searing and charcoaling, a dual fuel range cooker is the best option.
When you are looking to purchase a new range cooker you'll need to take into consideration various aspects such as size, functionality and price. In addition, you will also need to make sure that your home has an appropriate gas hook-up to the appliance. If you aren't sure then hire an appointment with a Gas Safe engineer to inspect your home prior to installation.
The Currys range of dual fuel range cookers offers options to fit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our exclusive Essentials collection. If you're looking for something little more advanced we also carry an extensive selection of premium JennAir ranges, featuring several unique features.
It is important to read the instruction manual for the owner before purchasing a dual-fuel range cooker. This will provide specific information regarding the electrical and gas requirements. It is essential to ensure that your home has a gas hook-up that is suitable, and you may need to get a plumber to install it for you if necessary. Depending on the home, you will also need to make sure that you have a dedicated cooker ring circuit in place and approved by a qualified electrician.